ZDS系列D型水力碎漿系統/ ZDS Series D-type Hydrapulper System
結構特點:
該系統由D型水力碎漿機、絞繩機、切斷器、沉渣井、抓斗、雜質分離機、圓筒篩、PLC控制部分組成。
D型水力碎漿機的轉子和出漿盤高出碎漿機槽體底平面 ,在轉子周圍形成一個低壓流區 ,使碎解過程中的粗大雜質從重渣口進入沉渣井
,再利用抓斗定期排出。
廢紙中的纏繞性雜質在回轉漿流的作用下絞成繩狀 ,由絞繩機拉出,進入沉渣井的摻帶部分漿料和輕雜質 ,周期性地進入雜質分離機
,經過處理后的良漿與碎漿機良漿匯合
,送下一工序處理。粗大雜質經沖洗后送至圓筒篩排出系統,回收的漿進入碎漿機。整個系統工作程序由一個PLC控制器進行控制。
Design Features:
The system consists of D-type hydrapuler,ragger,cutting machine,dregs well,
grab bucket impurity separator, drum screen and PLC controller.
Compared with the traditional hydrapulper,it could shorten the time of pulp
breaking and increase productivity without increasing the volume and power.
D-type hydrapulper rotor and the outlet tray are above the bottom surface of
pulper vat to form a low-pressure flow area around the rotor so as to make the
coarse impurities flow from the heavy impurity outlet into the dregs well during
pulping and the discharge impurities by grab buck et regularly. Affected by
turning pulp flow, the winding impurities in waste paper are twisted into the
rope, which can be pulled out by the ragger. The remain pulp and light
impurities flowing into the dregs well will be sent to the impurity separator
for prcession with periodicity. The pro- cessed accept is integrated with the
pulper accept and the n the pulp will enter the next working procedure. After
washed, the coarse impurities will be sent to the drum screen for discharge out
of the system The recycled pulp will flow into the pulper. The working procedure
of the complete system will be under control of PLC.
系統組成 /SYSTEM COMPonENTS
1
|
挑選園筒篩
|
Bale Breaker
|
2
|
鏈板輸送機
|
Chain Conveyer
|
3
|
D型水力碎漿機
|
D-type Hydrapulper
|
4
|
圓筒篩
|
Drum Screen
|
5
|
沉渣井
|
Dregs Well
|
6
|
雜質分離機
|
Impurity Separator
|
7
|
絞繩機、切斷器
|
Ragger,Cutting Machine
|
8
|
漿泵
|
Pulp Pump
|
9
|
抓斗
|
Grab Bucket
|